Mr. Thirsty
is reusable for many saturations.
Just allow natural drying by
evaporation either in the place
where it was used or move to a
location either over a hot air
register or sunlight. The
product must be brought indoors at
night.
Mr.
Thirsty
soaks up and holds over ten (10)
times its weight in water and water
based liquids. This amount is in
excess of 90 fluid ounces or up to
one (1) gallon of liquids. It will
return to its original size and
capacity through natural evaporation
allowing the product to be
continuously reused.
Mr.
Thirsty
is 36” long by 2'' in
diameter, making it easy to use,
easy to dispose of, and easy to
store. Upon removal from the box,
prior to use, simply stretch the
product to its full length to evenly
distribute the contents within the
covering.
Mr. Thirsty
can be molded to the shape of most
surfaces where it is placed. When
dried, after saturation, the product
will appear stiff and lumpy. This
will not affect the absorbing
capacity in any way and with light
hand pressure, Mr. Thirsty will
return to the original granular
condition for easy placement around
objects or corners.
Mr. Thirsty
will lock in the liquid absorbed and
some swelling will occur when filled
to capacity but you can not squeeze
or wring it out. After repeated use
and drying, some staining of the
covering will occur.
Mr.
Thirsty
is manufactured by Sheen Kleen Inc.,
the foremost producer of industrial
absorbents used in plants and
factories, office buildings and
public institutions. These products
are 100% made in the USA.
If Mr. Thirsty
has over-absorbed too much water
there may be a gel like portion of
the super absorbent that is forced
out of the covering. Don't Worry! -
there is nothing wrong with the
product and the gel will dry and
turn into a white crystal that can
easily be brushed off of the
covering.